Roof Soft Wash Cleaning in Kissimmee, FL

Those black streaks running down a Florida roof aren't dirt — they're an algae called Gloeocapsa magma, and it spreads across shingle, tile, and metal roofs throughout Osceola County because of the heat and humidity that never really lets up. It doesn't wash off with a garden hose, and it comes back fast if it isn't killed at the root, not just rinsed pale for a few weeks.

Roof soft wash cleaning is built around that problem. Instead of a high-pressure wand — which strips the protective granules off asphalt shingles and voids most manufacturers' warranties — the process uses low pressure and a cleaning solution formulated to kill algae, moss, and lichen on contact. The solution sits on the roof for several minutes, then gets rinsed off gently, taking the dead growth with it.

Kissimmee Power Washing runs this service on asphalt shingle, tile, and metal roofs across Kissimmee and the surrounding area, from single-story homes to steeper, multi-pitch roofs that need more careful ladder and harness work. The same low-pressure approach applies regardless of roof type — it's the one method that actually gets rid of the streaking instead of just hiding it for a season.

Why choose Kissimmee Power Washing for roof cleaning

Won't void your roof warranty

High-pressure washing on shingles strips the granules and can void a manufacturer's warranty outright. The soft wash method used here stays low-pressure the entire time, so the roof surface itself is never blasted.

Kills the algae, doesn't just hide it

The cleaning solution is formulated to kill Gloeocapsa magma and moss at the root, which is why a soft-washed roof stays clean far longer than one that was just rinsed with a hose.

Careful ladder and harness work

Steep or multi-story roofs get the safety setup they need — this isn't a job rushed from a single ladder angle to save time.

Insured for roof-level work

Every crew carries active liability insurance before going up on a roof, which matters more here than on any other service on this list.

How we work

  1. Inspect the roof from the ground and up close

    The crew checks the roofing material, the pitch, and how far the algae staining has spread before setting up.

  2. Wet down landscaping and gutters

    Plants, gutters, and downspouts get pre-rinsed so runoff doesn't concentrate the cleaning solution in one spot.

  3. Apply the soft wash solution

    The algae-killing solution goes on at low pressure and gets time to sit and work into the growth.

  4. Low-pressure rinse from a safe angle

    The roof gets rinsed clean without ever aiming a high-pressure stream directly at the shingles or tiles.

  5. Check gutters and downspouts run clear

    The crew confirms water is draining properly before calling the job done, since a soft wash can loosen debris that was sitting in a gutter.

  6. Photograph the finished result

    Before-and-after photos get taken from the ground, which matters for a roof most homeowners never climb up to inspect themselves and is standard for the many owners in the area who manage a property remotely.

How much does roof soft washing cost in Kissimmee?

Roof cleaning costs more than a house wash because of the safety setup, the longer dwell time the solution needs, and the extra care required on a steep or multi-story pitch.

ServiceRange (USD)What affects it
Average asphalt shingle roof (up to 2,000 sq ft)$350 – $550Roof size and how far the black streaking has spread
Larger or steep-pitch roof$550 – $850Additional safety setup and time for a steeper or bigger roof
Metal or tile roof$400 – $700Different cleaning solution and lower pressure than asphalt shingle

A roof that's never been soft washed usually needs a longer dwell time on the first visit.

Frequently asked questions about roof soft wash cleaning

Will this damage my shingles?

No — that's exactly what soft washing is designed to avoid. The pressure stays low enough that it never strips granules the way a straight pressure washer does. That's also why most roofing manufacturers specifically recommend soft washing over pressure washing for cleaning.

How long until the black streaks come back?

Because the solution kills the algae instead of just rinsing it off the surface, a soft-washed roof typically stays clean for two to three years, compared to just a few months for a simple rinse. It's the same reason a soft-washed gutter or brightened fascia stays clean far longer than a quick hose-down.

Do you walk on the roof?

As little as possible, and only when the roof pitch and material make it safe to do so. Most of the rinsing happens from the roof edge or a ladder instead, not by walking the full surface, which also keeps shingles from being disturbed or granules loosened during the cleaning process.

Is soft wash safe for tile and metal roofs?

Yes — the cleaning solution and pressure get adjusted for the roofing material, the same way pressure gets adjusted for wood decking or vinyl siding. Tile and metal need a different approach than asphalt shingle, and the crew sets up for whichever material is actually on the house before starting.

How long does roof soft washing take?

Most residential roofs take two to four hours total between setup, dwell time for the cleaning solution, and the final rinse. Larger or steeper roofs can take longer, since there's more surface area to cover and the crew moves more carefully, working from the edge or a ladder rather than walking the full roof.

We call back the same business day.

Areas we cover: St. Cloud, Poinciana, Celebration, Buenaventura Lakes, Intercession City, Loughman, Four Corners, Campbell.